Pixel Tile-Module
product code: AI8
Astera's 25x25cm videopanel is a good choice when building up modular lighting decoration or when setting up a large area to display color gradient, moving text or basic video-animations. It's 16 pixel can be controlled by DMX controllers like Astera's Artnet converter. For unique installations, Astera has developed an extra-bright version with 4 Nichia LEDs per pixel plus an additional 4 white LEDs per pixel which makes it one of the brightest panels available today.
| Pixels : |
16 |
Illuminants :
|
AI8: 16x 3-in-1 Nichia RGB LED, 16x White LEDs
AI8-XB: 64x 3-in-1 Nichia RGB LED, 64x White LEDs |
Power Consumption :
|
AI8: 7.5 W maximum / 5 W calibrated with automatic white
AI8-XB: 30 W maximum / 20 W calibrated with automatic white |
| Dimension |
230mm x 230 mm (pitch is 250mm)
|
Pixel pitch :
|
62,5 mm
|
Power supply :
|
24V DC, optionally 48V DC |
Light distribution :
|
Lambertian
|
Radiation angle :
|
120°
|
White LEDs are automatically calculated. So they are transparent to the user, and enhance the color performance
- Integrated solution with the Artnet controller/power-supply
- Easy wiring - no need to set addresses manually, simply connect in a chain
- The stripe can be separated into two parts. The two parts can then be interconnected with a flat wire again, or only the first part can be used standalone.
- The Pixel-Tilescan be connected to a special controller/power supply with 4-pin wire.
- Optionally, they can be directly connected to DMX512 and 24V DC by using a special adapter PCB.
- A maximum of 21 stripes can be connected in series.
- The stripe can be separated into two parts. Then either a flat-wire can be used to connect them again like on the picture below, or only the left half can be used standalone. The microcontroller will detect this condition and only provide 4 pixels instead of the usual 8.
